Most of the common problem in cities are blocked drains. This should be given proper attention to prevent severe damages. In cases of an emergency like this, it is a necessity to have some knowledge on how to address such problems. Below are simple steps on how to unblock clogged drains. Through these simple methods, you can fix the problem by yourself.
Here are the steps on how to unblock drains
Lift the cover of the drain within your area and check if the drain’s chamber is full of water. You might use some spade to be able to lift such cover. If the chamber does not have water, the block might be within the soil pipe of the house to the chamber. Otherwise, the problem is within the pipe near the main sewer. Furthermore check the chambers until you can find the problem.

After identifying the problem, you need to have drain roads with plunger ends and screw that is available in plumbing stores.

You may now screw the drain roads together with the help of a plunger head and then push the end to the opening to the blockage. To be able to help the rods go through the pipe, rotate it slowly clockwise. Note, do not rotate the rods counter-clockwise, this might make the rods break apart.

If there is no resistance, you may opt to add more rods until the rods will strike against the cause of blockage. Otherwise, you can now move the plunger back and forth, as quickly as possible, to remove the block. Keep doing this until the water flows through. Remove any found objects in the drains with the use of rubber gloves. But if you are having difficult time clearing the block, you should remove the rods and then fit the screw parts.

After removing the blocks, you should let the tap run with hot water to see if it is flowing properly, hot water loosens unwanted materials from the pipe.
If the problem persists, you may now need to call professional plumbers that might help you with the problem. In that case, you may opt to call us at Plumbers South Kensington. Because we at Plumbers South Kensington wants the best for you!